5056 - Ladder with working platform extendible with rope 
 

    General Characteristics:

• Movable on rotating wheels diam.200 equipped with brakes

• folding for storage

• Adjustment of height on third part, from rung to rung by pull rope

• Blockage by automatic hook

• Work platform 260x290mm with non-slip surface

• Square rung mm 30x30

• rung with non-slip surface

• Connection for upright - rung with double edge

• 5 years guarantee

• Capacy load kg. 100

  Suggested use:
A ladder purposely studied to perform long tasks at an elevated height.

1913 - Vertical ladder with platform

General Characteristics:

• Strong base in galvanised steel fully dismountable 260x78cm

• Rotating wheels Ø 200 

• Safety brackets

• Enclosed work platform with protection cm. 59x60

• Automatic jack hooked to the steps

• Square step mm 30x30

• Anti-slip surface

• Clamping pins

• Removable Anti-slip ends

• Rope and safety device availabel on request

• Load capacity 100kg.

Suggested use:
This ladder is built to satisfy the need for small maintenance work. The main feature of this ladder is that it can be moved with ease as it is fixed on a dismountable strong base in zinc steel equipped with leveller, rotating wheels and brackets. in the resting position, the ladder is folding ate the base so that it can pass through normal doors. To use the ladder, it is necessary to put the ladder in a vertical position, blocking it with the suitable pins. The removing of the ladder is made with the winch, every 30cm is adjusted by half automatic jacks which are hooked to the steps of the ladder fixed on the base. There is an enclosed platform with rail protection of 59x60cm according to regulation at the top of the ladder, which allows wrking with free hands.

Pagina in allestimento